Manuals.World
Categories

Lincoln Electric Welding Consumables 308 manual

Brand: Lincoln Electric, product: Lincoln Electric Welding Consumables 308

Type: Welding Consumables

Total pages: 2, PDF manual size: 0.05 Mb


Date:
11/12/2008
MSDS No.:
CAN-M460-C
Trade Name:
Blue Max Manual Electrodes
Sizes:
All
Supersedes:
11/15/06
M A T E R I A L S A F E T Y D A T A S H E E T
For Weldin
g
Consumables and Related Products
Conforms to Work
p
lace Hazardous Materials Information S
y
stem
(
WHMIS
)
Rev. November, 1988
Section I & II - Preparation and Product Information
Product Type:
Covered Electrode
Products: Blue Max
308/308L AC-DC 309/309L AC-DC
316/316L AC-DC 347 AC-DC
2100
The Lincoln Electric Company of Canada LP
179 Wicksteed Avenue
Toronto, Ontario M4G 2B9 CANADA
Phone: (416) 421-2600
Prepared by The Lincoln Electric Company, Cleveland, Ohio, USA
(216) 481-8100, on the date shown above.
Section III - Hazardous Ingredients (1)
I M P O R T A N T !
This section covers the materials from which this product is manufactured. The fumes and gases produced during welding with the normal use of this
product are covered by Section VII; see it for industrial hygiene information.
CAS Number shown is representative for the ingredients listed. All ingredients listed may not be present in all sizes.
(1) The term “hazardous” in “Hazardous Ingredients” should be interpreted as a term required and defined in the Hazardous Products Act and
does not necessarily imply the existence of any hazard.
Ingredients: CAS No. Wt. %
TLV
mg/m
3
LD
50
(Route/Species)
LC
50
mg/m
3
(Route/Species)
Titanium dioxides 13463-67-7 10-30 10
Not Available Not Available
Mineral silicates 1332-58-7 5-10 5**
590 g/kg LDLo
(oral/rat) reproductive
Not Available
Chromium and chromium alloys or compounds (as Cr) 7440-47-3 1-5 0.5(b)
2.16 mg/kg LDLo
(intravenous/rat)tumorigenic
Not Available
Limestone and/or calcium carbonate 1317-65-3 1-5 10
Not Available Not Available
Silicates and other binders 1344-09-8 1-5 10*
1153 mg/kg
(oral/rat)
Not Available
Iron 7439-89-6 1-5 10*
Not Available Not Available
Iron oxides 65996-74-9 1-5 5
Not Available Not Available
Manganese and/or manganese alloys and compounds (as Mn) 7439-96-5 0.1-1 0.2
9 g/kg
(oral/rat)
2.3 LCLo
(inhalation/human)
Quartz 14808-60-7 0.1-1 #0.05**
200 mg/kg LDLo
(intratracheal/rat)
300 LCLo
(inhalation/human)
Fluorides (as F) 7789-75-5 0.1-1 2.5
4250 mg/kg
(oral/rat)
Not Available
Niobium alloys (as Nb) (347 type only) 7440-03-1 0.1-1 10*
Not Available Not Available
Cobalt 7440-48-4 0.1-1 .02
6170 mg/kg
(oral/rat)
Not Available
Nickel (metal) (2100 type only) 7440-02-0 0.1-1 1.5
50 mg/kg LDLo
Not Available
Molybdenum alloys (as Mo) (316 type only) 7439-98-7 0.1-1 10
114 mg/kg LDLo
(intraperitoneal/rat)
Not Available
Lithium compounds (as Li) 554-13-2 0.1-1 10*
4111 mg/kg LDLo
(oral/human)
Not Available
Stainless steel core wire
60-100
Nominal core wire composition:
Chromium 7440-47-3 20-30 0.5(b)
2.16 mg/kg LDLo
(intravenous/rat)tumorigenic
Not Available
Nickel 7440-02-0 10-13 1.5
50 mg/kg LDLo
Not Available
Molybdenum (316 type only) 7439-98-7 2.5 10
114 mg/kg LDLo
(intraperitoneal/rat)
Not available
Manganese 7439-96-5 2.0 0.2
9 g/kg
(oral/rat)
2.3 LCLo
(inhalation/human)
Iron 7439-89-6 bal. 10*
Not Available Not Available
Notes:
(*) Not listed. Nuisance value maximum is 10 milligrams per cubic meter.
TLV value for iron oxide is 5 milligrams per cubic meter.
(**) As respirable dust.
(LDLo, LCLo) Lowest published toxic concentration.
(b) The OSHA PEL for chromium (VI) is 5 micrograms (0.005
milligrams) per cubic meter. The TLV for water soluble
chromium (VI) is 0.05 milligrams per cubic meter and the
TLV for insoluble chromium (VI) is 0.01 milligrams per
cubic meter.
(#) Crystalline silica (quartz) is on the IARC (International
Agency for Research on Cancer) and NTP (National
Toxicology Program) lists as posing a carcinogenic risk to
humans.
Section IV - Physical Data
Physical data such as odor, vapor pressure, density, evaporation rate and freezing or boiling points are not listed as they are not applicable
to this product and its use.
Section V - Hazard Data
Non Flammable; Welding arc and sparks can ignite combustibles and flammable products. See CSA W117.2 Section 9.7 as referenced in
Section VIII. Product is inert, no special handling or spill procedures required.
Rev 9/07 (CONTINUED ON SIDE TWO)

check Other guides for Lincoln Electric

Category SubCategory Product name
Power Tools Welding Consumables Lincoln Electric Air Compressor IM581 (34 pages in PDF)
Power Tools Welding Consumables Lincoln Electric Appliance Trim Kit SVM100-A (100 pages in PDF)
Power Tools Welding Consumables Lincoln Electric Blowtorch XL (2 pages in PDF)
Power Tools Welding Consumables Lincoln Electric Computer Hardware 9904 (2 pages in PDF)
Power Tools Welding Consumables Lincoln Electric Fan IM438-B (32 pages in PDF)
Power Tools Welding Consumables Lincoln Electric Fan LA-17 (16 pages in PDF)
Power Tools Welding Consumables Lincoln Electric Fan LA-17V (16 pages in PDF)
Power Tools Welding Consumables Lincoln Electric Fan LA-26 (16 pages in PDF)
Power Tools Welding Consumables Lincoln Electric Fan LA-26V (16 pages in PDF)
Power Tools Welding Consumables Lincoln Electric Fan LA-9 (16 pages in PDF)

Lincoln Electric is a well-known company selling the range of equipment including automotive. We collected 184 rare user guides created by this supplier . Now you're reading a user guide for Lincoln Electric Welding Consumables 308.


This manual is encoded in PDF file format

The PDF (Portable Document Format) was created in the early 1990’s as a brand new way for computer users to share documents between each other, especially if one person has a PC and the other a Mac. The shared PDF will display exactly the same on both computers.

PDF was created by Adobe and is no maintained by the International Organisation for Standardisation (ISO). It is a very interactive format and can contain buttons, links, audio, video, form fields, business logic and even electronic signatures. It can capture fonts, images as well as document texts and can also format documents from many different programs.

Most PDF viewers or the software used to view the PDF is provided free of charge. There are many options available including Scribus, pdfTex, Adobe InDesign, Adobe Illustrator as well as Google Docs. The most popular however is Acrobat Reader DC.

Why we provide Lincoln Electric Welding Consumables manuals in PDF?:

  • · PDF’s are incredibly convenient and are easy to open and read by everyone, regardless of whether they have a PC or Mac.
  • · A PDF can be compressed into a file size that is easy to email while still maintaining the quality of the images.
  • · A PDF file can be made incredibly secure as you can set up passwords, digital signatures and even watermarks.
  • · A PDF allows you input many different types of content including images, animations, 3D models, hyperlinks and buttons.

PDF’s do have their drawbacks such as:

  • · PDF’s can often be difficult to edit or to extract information from as it’s original intention was to make the exchange of documents easier.
  • · There are different types of PDF’s, especially when searching or extracting information.

If you have a document that you would like to convert into a PDF, there are many sites online that will do the conversion for you for free and very quickly. The same is true if you are looking to convert from PDF format into a different format. This is often a much easier way to edit a PDF.

PDF size: 51.20 KB
Other Lincoln Electric manuals