Manuals.World
Categories

Clarity Amplified Phone CE225 manual

Brand: Clarity, product: Clarity Amplified Phone CE225

Type: Amplified Phone

Total pages: 6, PDF manual size: 0.54 Mb


CE225 PHONE AMPLIFIER USER GUIDE
Important Safety Instructions
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury to persons, including the following:
• Read and understand all instructions.
• Follow all warnings and instructions marked on the product.
• Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
• Do not use this product near water, for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near
a swimming pool.
Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock
from lightning.
• Do not use this telephone to report a gas leak in the vicinity of
the leak.
• Use only the power cord and batteries indicated in this manual. Do
not dispose of batteries in a fire. They may explode. Check with
local codes for possible special disposal instructions.
Features
Power Requirements
The CE225 requires two AAA batteries (alkaline-type
recommended). Install the batteries in the battery compartment
before using.
Important: Disconnect the modular cord from the CE225 and the
short cord from the telephone before opening the battery door or
replacing the batteries.
Battery Installation
1. Remove screw from battery door.
2. Remove battery door and insert the batteries as indicated.
3. Replace battery door by sliding and snapping into place.
4. Replace screw to secure.
Installation
1. Remove the handset modular cord from the telephone base and
insert into the jack at the bottom (handset) of the CE225.
2. Insert the end of the short cord into the handset jack located in
the base of the telephone.
3. All plugs should be inserted so that they “snap” into place.
4. Pick up the handset. Check for dial tone.
Volume Control
The CE225 provides 15 dB of volume control before the BOOST
button is activated. Once the BOOST button is pressed, the CE225
will provide up to 28 dB of gain. The frequency level is controlled
with the volume dial located on the top of the CE225.
1. Turn the frequency control upward to increase the volume of the
higher frequencies; turning the frequency control downward will
decrease the high frequencies back to normal.
If used together with a FCC68 certified Telephone Set, this amplifier
may affect the compliance of Hearing Aid Compatibility and Volume
Control of the telephone set in FCC68.
Clarity
®
Power
TM
Technology
Insures the user that high frequency sounds are amplified more so
than the lower frequencies. Conversations will not only be louder,
but clearer and easier to understand.
Boost Button
The BOOST button engages the amplifier and Clarity Power. The
BOOST button will automatically reset to OFF upon hang-up. The
BOOST button will need to be depressed with each phone call to
restore settings.
Boost LED
The BOOST LED will illuminate green when the boost feature
is activated.
Operation
Depress BOOST button and adjust the Volume Control to desired
listening level.
Battery Indicator
Monitors the condition of the batteries. The indicator will flash
red when the batteries should be changed. The led will only flash
while the unit is in use. Replace the batteries as soon as possible.
The battery should be replaced with 2 AAA batteries (alkaline-type
recommended).
Battery Life
The battery life depends upon how often and how you adjust the
frequency level. The life of the battery should last between two and
six months, depending on the type of use.
Trouble Shooting
The CE225 is designed for long and trouble free operation. However,
if any problem arises in using your telephone disconnect the amplifier
from the telephone. Re-connect the handset to the telephone. If the
problem disappears, than the problem may lie within your amplifier.
If the handset is completely dead, make sure each cord is correctly
installed. If the handset is still dead, the battery may be incorrectly
installed or need replacing.
If the problem does not go away after disconnecting the amplifier,
than the problem lies in your telephone or telephone line. Notify
your phone company or contact the manufacturer of the telephone
for servicing procedures or facilities.
We welcome your feedback! Our Customer Service Representatives
can be reached at 1-800-552-3368 or 423-622-7793.
SAVE THESE INSTRUCTIONS
RED LED
GREEN LED
SHORT CORD
TO TELEPHONE
VOLUME
CONTROL
TO HANDSET
BOOST

check Other guides for Clarity

Category SubCategory Product name
Communications Amplified Phone Clarity Amplified Phone 51361001 (20 pages in PDF)
Communications Amplified Phone Clarity Amplified Phone 54000001 (2 pages in PDF)
Communications Amplified Phone Clarity Amplified Phone C1000 (56 pages in PDF)
Communications Amplified Phone Clarity Amplified Phone C2210 (102 pages in PDF)
Communications Amplified Phone Clarity Amplified Phone CE225 (6 pages in PDF)
Communications Amplified Phone Clarity Amplified Phone Clarity DECT6.0 (25 pages in PDF)
Communications Amplified Phone Clarity Amplified Phone D603 (2 pages in PDF)
Communications Amplified Phone Clarity Amplified Phone D703 (25 pages in PDF)
Communications Amplified Phone Clarity Amplified Phone E814 (64 pages in PDF)
Communications Amplified Phone Clarity Amplified Phone E814CC (64 pages in PDF)

Clarity is a well-known supplier selling the range of stuff related to automotive. We have 80 original handbooks created by this distributer . Now you're reading a user guide for Clarity Amplified Phone CE225.


This manual is encoded in PDF file format

The PDF (Portable Document Format) was created in the early 1990’s as a brand new way for computer users to share documents between each other, especially if one person has a PC and the other a Mac. The shared PDF will display exactly the same on both computers.

PDF was created by Adobe and is no maintained by the International Organisation for Standardisation (ISO). It is a very interactive format and can contain buttons, links, audio, video, form fields, business logic and even electronic signatures. It can capture fonts, images as well as document texts and can also format documents from many different programs.

Most PDF viewers or the software used to view the PDF is provided free of charge. There are many options available including Scribus, pdfTex, Adobe InDesign, Adobe Illustrator as well as Google Docs. The most popular however is Acrobat Reader DC.

Why we provide Clarity Amplified Phone manuals in PDF?:

  • · PDF’s are incredibly convenient and are easy to open and read by everyone, regardless of whether they have a PC or Mac.
  • · A PDF can be compressed into a file size that is easy to email while still maintaining the quality of the images.
  • · A PDF file can be made incredibly secure as you can set up passwords, digital signatures and even watermarks.
  • · A PDF allows you input many different types of content including images, animations, 3D models, hyperlinks and buttons.

PDF’s do have their drawbacks such as:

  • · PDF’s can often be difficult to edit or to extract information from as it’s original intention was to make the exchange of documents easier.
  • · There are different types of PDF’s, especially when searching or extracting information.

If you have a document that you would like to convert into a PDF, there are many sites online that will do the conversion for you for free and very quickly. The same is true if you are looking to convert from PDF format into a different format. This is often a much easier way to edit a PDF.

PDF size: 552.96 KB
Other Clarity manuals